Wrap-around case packers with case formation and closure in continuous to pack products into cases or into trays.
– possibility to control all machine functions
– easy and precise size change
– high flexibility to handle every kind of container
– machine automatic check-up
– easy maintenance
– high accessibility
– machine solid and reliable

Product Description
Suitable For The Following Products
Bottles | (P.E.T. / GLASS / HDPE) |
Cans | (ALUMINUM / STEEL) |
Pots | (P.E.T. / GLASS / HDPE) |
Multipacks | (CLUSTER, FILM, ASTUCCI) |
Bricks |
BLUE [email protected] (up to 30 packs/min) WA Case packer / Tray
Technical Specifications
BLUE [email protected]È
BLUE [email protected] 30 PPM |
|||||
Overall length | mm | 10840 | |||
inches | 426.77 | ||||
Machine width | mm | 2120 (+ 1560) | |||
inches | 83.46 (+61.42) | ||||
Working height | mm | 1070 – 1365 | |||
inches | 42.1 – 53.7 | ||||
Total power | kW | 12.60 | |||
Air consumption | Nl/min | 150 | |||
Air pressure | BAR | 6 |
MULTIPRODUCTS “B.I.” SEPARATION SYSTEM (PATENTED)
Control by means of photocells for correct product position and for minimum product accumulation in each channel. The product is separated in the required configuration by a mesh belt driven by a clutch connected with the main motor of the machine and controlled by the cam programmer.
Size change is achieved electronically and with simple adjustments and hand wheels.
PRODUCTS TRANSFER GROUP WITH BARS
After the collation of the products into the required configuration, the block of the products is transferred to couple with the tray or the pad. The group is complete with plastic lateral guide rails in order to obtain a perfect products compacting. The group is equipped with torque limiter that safeguards the bars group from eventual accidental stops.
MAGASINE AND BLANK PICK-UP
The blank is picked up from the magazine by a device with suction cups and vacuum. The magazine is adjustable and has an high capacity. The magazine is fully accessible for easier and faster loading. The patented pick-and-place system ensures maximum precision and reliability.
CASE FORMATION (PATENTED)
The case is formed “in-line”. After the product has been coupled with the blank, the internal flaps are folded and the hot melt glue is applied; then the top of the case is folded and finally the external flaps are folded.
DRIVE MODELAll machine functions are controlled by a touch screen panel.
SIZE CHANGESize change is achieved electronically through the operator panel and with simple adjustments through hand wheels and digital counters.